Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 214

3 If the device is already partitioned, you must remove some or all of the partitions before you
use the EVMS–based partitioning proposal. If the device is unpartitioned, skip to
3a On the Suggested Partitioning page under Partitioning, select Create Custom Partition
Setup.
3b On the Preparing Hard Disk: Step 1 page, select the disk, then click Next.
3c On the Preparing Hard Disk: Step 2 page under Disk Areas to Use, do one of the following
to specify which partitions can be deleted:
WARNING: The data on the deleted partitions will no longer be available.
214 OES 2 SP2: Installation Guide
Keep One or More Partitions: Select only those partitions that can be deleted;
deselect (clear the check box) the partitions that you want to keep.
This allows you to keep partitions that you want to keep if they have data on them,
and you don't want them to be deleted. This is very important if the disk was used
previously, and has an NSS partition with pools that you want to keep.
Step 4