Installing Or Configuring Oes Services On An Existing Server - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

4.2 Installing or Configuring OES Services on an
Existing Server
NOTE: For information on installing and configuring OES services as a different administrator than
the one who originally installed the OES server, see
a Subcontainer Administrator," on page
To install or configure OES 2 SP2 services on an existing OES 2 SP2 server or SLES 10 SP3 server:
1 Open YaST.
2 If an OES 2 SP2 installation source has not been added to the server, continue with this step.
Otherwise, skip to
2a Click Software > Add-on Product.
2b Click Add.
2c In the Add-On Product Media dialog, click CD > Next.
If you are using an alternate installation source, click the appropriate option that matches
your installation source selection.
2d In the Insert the Add-On Product CD dialog box, select the appropriate drive where you
want to insert the CD labeled Open Enterprise Server 2 SP2 CD 1.
2e Click Eject.
2f Insert the CD labeled Open Enterprise Server 2 SP2 CD 1, then click Continue.
2g Read and accept the Novell Open Enterprise Server 2 license agreement, then click Next.
2h Confirm that the Add-On Product Installation page shows the correct path to the OES
media, then click Next.
2i Skip to
3 If an OES installation source has already been added to the server, click Open Enterprise
Server > OES Install and Configuration.
4 On the Software Selection page, select the OES components that you want to install or
configure.
Services that you have already installed are indicated by a blue check mark in the status check
box next to the service.
5 If you are only configuring or reconfiguring services that are already installed, click Accept,
then skip to
104 OES 2 SP2: Installation Guide
18.
Step 3.
Step 4.
Step 7.
Section 2.5, "Installing and Configuring OES as