Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 64

2a On the Installation Settings page, click the CA Management link.
2b On the Managing CA and Certificates page, click Edit Default Settings.
2c On the Edit Default Settings page, specify the password for
Confirm Password fields, then click Next.
3 When the setting are as desired, click Next and continue with one of the applicable procedures
as follows:
"Specifying LDAP Configuration Settings" on page
"Specifying eDirectory Configuration Settings" on page
Specifying LDAP Configuration Settings
Many of the OES services require eDirectory. If eDirectory was not selected as a product to install
on this server but other OES services that do require LDAP services were installed, the LDAP
Configuration service displays, so that you can complete the required information.
To specify the required information on the Configured LDAP Server page:
1 In the eDirectory Tree Name field, specify the name for the existing eDirectory tree that you are
installing this server into.
2 In the Admin Name and Context field, specify the name and context for user Admin in the
existing tree.
3 In the Admin Password Name field, specify a password for user for user Admin in the existing
tree.
64 OES 2 SP2: Installation Guide
in the Password and
root
64.
66.