Registering The Server In The Novell Customer Center (Gui) - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

3 Verify that the server is registered by checking whether you have the service types and catalogs
needed for updates:
3a To verify the service type, enter
rug sl
The results should be similar to the following:
The URIs you see for the ZYPP type differ based on your installation source.
3b To verify the catalogs, enter
rug ca
The results should be similar to the following:
7.3.3 Registering the Server in the Novell Customer Center
(GUI)
1 In the YaST Control Center, click Software > Novell Customer Center Configuration.
2 On the Novell Customer Center Configuration configuration page, select all of the following
options, then click Next.
Option
Configure Now
Hardware Profile
Optional Information
Registration Code
Regularly Synchronize
with the Customer
Center
150 OES 2 SP2: Installation Guide
What it Does
Proceeds with registering this server and the OES product with the Novell
Customer Center.
Sends information to the Novell Customer Center about the hardware that
you are installing SLES 10 SP1 and OES 2 on.
Sends optional information to the Novell Customer Center for your
registration. For this release, this option doesn't send any additional
information.
Makes the registration with activation codes mandatory.
Keeps the installation sources for this server valid. It does not remove any
installation sources that were manually added.