Ifolder Fails To Start; Spident Command Reports That Sles Is Not Updated; Oes-Spident Command Reports That Oes Is Not Updated - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

To install additional OES services on a server you have upgraded through ZENwork Linux
Management, you must add the required OES 2 SP2 and SLES 10 SP3 installation sources in YaST.
For more information, see
D.8.2 iFolder Fails to Start
Details
After the upgrade finishes, the system has both old and new versions of the following RPMs:
novell-ifolder-enterprise-plugins
novell-ifolder-mono
®
As a result, iFolder services can't start.
Workaround
After the upgrade finishes, run the following commands:
source /opt/novell/ifolder3/mono/bin/novell-ifolder-mono-environment.sh
gacutil2 -i /usr/lib/mono/log4net/log4net.dll -root /opt/novell/ifolder3/mono/
lib
If desired, you can manually remove the older RPMs:
novell-ifolder-enterprise-plugins-3.7.1.9211.1-0.4.1
novell-ifolder-mono-2.4.0.13
D.8.3 SPident Command Reports that SLES Is Not Updated
Details
Entering the command displays the following:
SPident
CONCLUSION: System is NOT up-to-date!
found SLE-10-architecture-SP2 + "online updates"
expected SLE-10-architecture-SP3
Workaround
Enter
cat /etc/SuSE-release
D.8.4 oes-SPident Command Reports that OES Is Not Updated
Details
Entering the
oes-SPident
CONCLUSION: System is NOT up-to-date!
found SLE-10-OES2-SP1-architecture + "online updates"
expected SLE-10-OES2-SP2-architecture
Section 3.2, "Setting Up an Installation Source," on page
instead. The actual version displays.
command displays the following:
Upgrading to OES 2 SP2 Through a ZENworks Linux Management Server 241
39.