Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 137

4 On the Novell Modular Authentication Service page, click Next.
5 Continue with with
Specifying LDAP Configuration Settings
Many of the OES services require eDirectory. If eDirectory was not selected as a product to upgrade
or install but other OES services that do require LDAP services were installed, the LDAP
Configuration service displays so that you can complete the required information.
1 In the eDirectory Tree Name field, specify the name for the existing eDirectory tree that you are
installing this server into.
2 In the Admin Name and Context field, specify the name and context for user Admin on the
existing tree.
3 In the Admin Password Name field, specify a password for user for user Admin on the existing
tree.
4 Add the LDAP servers that you want the services on this server to use. The servers that you add
should hold the master or a read/write replica of eDirectory. Do the following for each server
you want to add.
4a Click Add.
4b On the next dialog, specify the following information for the server to add, then click Add.
Server IP Address
LDAP port
Secure LDAP port
4c Click Add.
4d (Optional) Repeat
5 When all the LDAP servers that you want to specify are listed, click Next.
6 Continue with "Configuring Novell Open Enterprise Server Services" on page
Configuring Novell Open Enterprise Server Services
1 After you complete the LDAP configuration or eDirectory configuration, the Novell Open
Enterprise Server Configuration summary page is displayed, showing all the OES components
you updated and installed and their configuration settings. Review the setting for each
component and click the component heading to change any settings.
"Specifying LDAP Configuration Settings" on page
Step 4a through Step 4c to add additional servers.
137.
137.
Upgrading to OES 2 SP2 137