Known Issues And Caveats; Installing Additional Oes Services; Section D.8, "Known Issues And Caveats - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

3e Click Add, click the down-arrow by Servers, then select the servers you want to assign.
3f Click OK > Next.
3g Schedule the bundles to install according to your organization's policy.
3h Click Next > Finish > OK.
4 Assign the OES2-SP2-Online-bundle to the OES 2 SP1 servers under upgrade, and schedule
the bundles to install appropriately:
4a In the ZENworks Control Center, click Bundles.
4b Click OES2-SP2-Online.
4c In the left column, select the OES2-SP2-Online-bundle entry.
4d Click Action > Assign Bundle.
4e Click Add, click the down-arrow by Servers, then select the servers you want to assign.
4f Click OK > Next.
4g Schedule the bundles to install according to your organization's policy.
4h Click Next > Finish > OK.
5 Assign the OES2-SP2-file-bundle to the OES 2 SP1 servers:
5a In the ZENworks Control Center, click Bundles.
5b In the left column, select the box for the OES2-SP2-File-Bundle entry.
5c Click Action > Assign Bundle.
5d Click Add, click the down-arrow by Servers, then select the servers you want to assign.
5e Click OK > Next.
5f Schedule the bundles to install according to your organization's policy.
5g Click Next > Finish > OK.
IMPORTANT: The servers you have selected in the preceding steps are now prepared to be
upgraded to OES 2 SP2. The actual upgrade operations occur automatically as scheduled.
WARNING: Make sure that both the SLES 10 SP3 and the OES 2 SP2 bundles have been applied
before restarting a server that is being upgraded.
D.8 Known Issues and Caveats
Section D.8.1, "Installing Additional OES Services," on page 240
Section D.8.2, "iFolder Fails to Start," on page 241
Section D.8.3, "SPident Command Reports that SLES Is Not Updated," on page 241
Section D.8.4, "oes-SPident Command Reports that OES Is Not Updated," on page 241
D.8.1 Installing Additional OES Services
ZENworks Linux Management bundles are reflected in both the rug and the ZEN software updater
interfaces. They are not, however, entered as installation sources in YaST.
240 OES 2 SP2: Installation Guide