Verifying That Your Channel Subscriptions Are Up-To-Date - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

4 When the Software Updater Information status indicates that the update was successful, click
Close.
5 If necessary, rerun the updater until all the desired patches have been installed.
6 To finish the update, reboot the server.
Rebooting the server activates the new kernel if it has been updated and ensures that OES
services that need restarting after patching are restarted.
7.5 Verifying That Your Channel Subscriptions
Are Up-to-Date
When an OES 2 server is updated properly, the update channel list is refreshed to include Updates
entries for your OES 2 and SLES 10 versions.
To verify that you have updates from both update channels:
1 At a terminal prompt on the server you have updated, enter the following command:
rug ca
The list of channels should include Updates channels for your OES 2 and SLES 10 versions.
For example, after updating an OES 2 SP2 server, the channel listing should include both
SLES10-SP3-Updates
2 If the channel listing on your server doesn't include the updates channels for your OES 2 and
SLES 10 versions, follow the instructions in
php/
search.do?cmd=displayKC&docType=kc&externalId=3150078&sliceId=2&docTypeID=DT_
TID_1_1&dialogID=76715112&stateId=0%200%2076711680)
3 After the channel list contains the correct entries, update your server by repeating the pertinent
instructions in Section 7.4, "Updating the Server," on page
and
OES2-SP2-Updates
TID 3150078 (http://www.novell.com/support/
as subscribed channels.
to resolve the issues.
153.
Updating (Patching) an OES 2 SP2 Server 159