Selecting The Installation Mode Options - Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual

IMPORTANT: If an error occurs, for example if the wrong password is entered, you can rerun
the configuration phase again by either
Rebooting the server
or
Entering the following command at a terminal prompt:
sudo yast2 channel-upgrade-oes
10 Various messages indicate the services being configured. When the Login prompt appears,
verify that the upgrade was successful. See the procedures in
Was Successful" on page
11 Complete the server setup by following the procedures in
Upgrade Tasks" on page

5.4.6 Selecting the Installation Mode Options

1 When the Installation Mode page displays, select the following menu options:
1. Update
2. Include Add-On Products from Separate Media
IMPORTANT: To upgrade previously installed OES services and install any additional
OES services, you must select the Include Add-On Products from Separate Media option.
If you don't, the server is only updated to SLES 10 SP3 and none of the OES services are
upgraded.
2 Click Next.
3 Continue with "Specifying the Partition to Update" on page 122
Product Installation Information" on page
72.
143.
124, depending on which matches your installation.
"Verifying That the Installation
"Completing OES Installation or
or "Specifying the Add-On
Upgrading to OES 2 SP2 121