Novell OPEN ENTERPRISE SERVER 2 SP2 Installation Manual page 131

2 Obtaining the latest SUSE release notes might fail at this point. If it does, view the log to verify
that the network configuration is correct, then click Next.
3 If the network configuration is not correct, click Back > Back and fix your network
configuration. See "Network Interface" on page
invalid DNS server is specified.
or
Skip this test by clicking No, Skip This Test, then continue with
services configurations require a connection to the Internet.
Skipping this test also skips downloading release notes, configuring the Novell Customer
Center, and updating online.
4 Continue with "Specifying Novell Customer Center Configuration Settings" on page
you skip this test, continue with
Specifying Novell Customer Center Configuration Settings
To receive support and updates for your OES 2 SP2 server, you need to register it in the Novell
Customer Center. When the Novell Customer Center Configuration page is displayed, you have
three options:
"Updating a Registered Server (Recommended)" on page 131
"Registering the Server Later / Skipping a Registered Server Update" on page 131
"Registering the Server During the Upgrade" on page 131
Updating a Registered Server (Recommended)
1 If you have already registered your OES 2 server and you want to download the available
patches, leave Configure Now selected and click Next.
YaST contacts the server (which might take a few minutes) and then downloads the available
patches.
2 Go to
Step 8 on page
Registering the Server Later / Skipping a Registered Server Update
1 Click Configure Later.
2 Continue with
"Upgrading eDirectory" on page
3 Register the server after the installation is complete by using the procedures in
"Registering the Server in the Novell Customer Center," on page
Registering the Server During the Upgrade
1 On the Novell Customer Center Configuration configuration page, select all of the following
options, then click Next.
Option
Configure Now
Hardware Profile
"Upgrading eDirectory" on page
133.
What it Does
Proceeds with registering this server and the SLES 10 SP3 and OES
product in the Novell Customer Center.
Sends information to the Novell Customer Center about the hardware that
you are installing SLES 10 SP1 and OES 2 on.
55. The most common problem is that an
Step 4. However, most OES
136.
136.
149.
131. If
Section 7.3,
Upgrading to OES 2 SP2 131