A Additional Installation Information; Installation Options; A.1 Installation Options - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

Additional Installation Information
A
The following sections contain additional information to help you install Novell
Linux Management:
Section A.1, "Installation Options," on page 117
Section A.2, "Automating Installation of the ZENworks Agent," on page 118
Section A.3, "Installing ZENworks Linux Management on a SLES 9 Server with a Minimal
Installation," on page 119
Section A.4, "Installing ZENworks Linux Management on a SLES 10 Server with a Customize
Installation," on page 119
Section A.5, "Installing a ZENworks Server on a Device Configured with DHCP," on page 121

A.1 Installation Options

When you installed Novell ZENworks Linux Management on a ZENworks Primary Server or on
secondary ZENworks servers as described in
on page 41 or Section 6, "Installing a ZENworks Secondary Server," on page
standard installation without using additional installation options.
When you installed ZENworks Agent on managed devices as described in
the ZENworks Agent and Registering the Device," on page
options.
NOTE: If you are performing an upgrade from a previous version of ZENworks Linux
Management, as explained in
command. For more information, see
upgrade
The following options can be used with the
Options that can be used with the ZLM-install command
Table A-1
Option Description
Prompt before adding each package.
-p
-s Run silently using data from a previous configuration. Specify the response file that you
want to use. This is the response file that you recorded user input by using the -r
command. The following command shows the option's usage:
zlm-install -s config_file
Record user input, including passwords, to be used in future silent-configuration
-r
installations. Specify the response file that you want to record the user input to. This is the
response file that you use with the -s command to run a silent configuration. The following
command shows the option's usage:
zlm-install -r config-file
-a Install only agent portions of ZENworks Linux Management.
Section 5, "Installing the ZENworks Primary Server,"
"Upgrade" on page 71, you can use upgrade options with the
"Upgrade Options" on page
zlm-install
®
ZENworks
47, you performed a
Section 7.2, "Installing
54, you used the or
-a
91.
command:
Additional Installation Information
A
®
installation
-o
zlm-
117