Selecting The Default Compose View; Section 3.1.7, "Selecting The Default Compose View - Novell GROUPWISE 8 - WEBACCESS CLIENT Manual

Figure 3-1
You have the following options to deal with auto-saved messages:
Open: Opens the auto-saved messages so that you can finish composing them.
Save: Saves the messages as a regular Work In Progress item so that you can finish composing the
messages later.
Delete: Deletes the auto-saved messages. The information in them is permanently lost.
Skip: Retains the saved messages on disk but does not recover them in WebAccess. The next time
you start WebAccess, the Auto-Save window reappears.
Enabling or Disabling Auto-Save
By default, Auto-Save is enabled if you use a high-speed connection to access your GroupWise
system. It is disabled by default if you use a low connection speed. For more information on your
login options, see
1 On the main WebAccess page, click Options in the upper right corner.
2 Click the Compose tab.
3 Select Enable auto-save to enable Auto-Save.
or
Deselect Enable auto-save to disable Auto-Save.
4 Click Save, then click Close.
Saving an Unfinished E-Mail
1 In an open item, click the Save icon.
2 Click the folder you want to save the item to, then click OK.
The draft message is placed in the folder you chose in Step 2. The default folder for unfinished
messages is the Work In Progress folder

3.1.7 Selecting the Default Compose View

When you are composing a message in GroupWise WebAccess, you can select to have the default
compose format in either plain text or HTML.
1 On the main WebAccess page, click Options in the upper right corner.
2 Click the Compose tab.
3 Select either Plain text or HTML in the Message Format section.
4 Click Save, then click OK.
36 GroupWise 8 WebAccess Client User Guide
Auto-Save Window
Section 1.2, "Starting GroupWise WebAccess," on page
.
13.