Menus And Functions; A The Settings You Need - Visonic POWERMASTER-10 User Manual

MENUS AND FUNCTIONS

4. Menus and Functions
This chapter explains the user programming features of your PowerMaster-10 system and allows you to tailor
the PowerMaster-10 system according to your specific needs. The chapter is divided into three sections, as
follows:
Part A – Provides you with a general description of available User Setting options.
Part B – Guides you how to enter/exit the User Settings menu and how to select the desired setting options.
Part C – Guides you to execute the selected settings.

A The Settings You Need

The installer provides you with a ready-to-use alarm system, but a number of settings may still be needed. The
User Settings menu provides you with essential options that allow you to adapt the system to your specific
needs, to operate it as you desire and to upgrade it when necessary.
Below is a list of the User Settings menu options. A more detailed list is provided in section B.1. Detailed setting
instructions for options 1 to 12 are provided in sections C.1 to C.12.
1. Setting the zone bypass scheme(*)
2. Reviewing the zone bypass scheme(*)
3. Recalling the zone bypass scheme(*)
4. Programming user codes(**)
5. Add / delete keyfob transmitters (**)
6. Setting the time & time format(**)
7. Setting the date & date format(**)
8. Enabling / disabling auto-arming(**)
9. Setting the auto-arming time(**)
10. Programming private phone numbers(**)
11. Enabling / disabling the squawk option(**)
12. Programming the scheduler(**)
* These menu options are available only if the bypass option was enabled by the installer.
** This option can be accessed only by the master user using the master user code.
Note 1: Although the user settings are your responsibility, you may request your installer to perform them for
you (except for the user codes which you desire to keep secret).
Note 2: Some options may not be available on your PowerMaster-10 system.
12 D-302757