Panel Indicator And Controls; Led Indicators - Visonic POWERMASTER-10 User Manual

• Numerical keys serve as function keys: When
the system is disarmed, the numerical keys are
used also to control various system functions. A
simple icon on each key identifies the task of that
key
• Data retrieval: You can obtain status information,
trouble information and review memorized alarm
events visually. (See Chapter 3).
• Event log: System events are memorized in an
event log that stores the most recent 100 events,
each tagged with the time and date of the event.
You can access this log and review the past
events in case of need such as after a burglary.
(See Chapter 8).
• Looking after elderly, physically handicapped
and infirm individuals: The system can be
programmed to monitor people activity within the
protected area and send out an alert message if
no movement is detected in the area for a
predefined period of time (See Chapter 6).

Panel Indicator and Controls

20

LED Indicators

No. Indication
2
3
4
5
D-302757
Figure 1. Controls and Indicators
Function
Power (Green): Indicates that your system is properly connected to the power outlet.
Arm (Red): Lights when the system is in the armed state.
Chime (Green): Chime zones will chime when disturbed (see Chapter 2).
Trouble (Orange): Lights when the system is in a state of trouble (see Chapter 3).
• Distress calls: Miniature pushbutton portable
transmitters given to specific individuals may be
used for sending emergency calls for help.
• Disarming under duress: If a user is forcibly
compelled to disarm the system, he can do so
using a special code ("Duress Code") that disarms
the system apparently as usual, but sends a silent
alarm to the monitoring station (see chapter 2).
• System supervision: All wireless peripherals
within the protected site send periodic keep alive
supervision messages. If such a message is
overdue, the PowerMaster-10 displays a 'missing'
trouble message. Your installer can disable this
feature if so desired.
• Battery
supervision:
continuously monitors the battery condition of the
sensors and devices in the system and displays a
'Low Battery' message whenever a battery in a
needs to be replaced within maximum 30 days..
Wireless sirens can still provide 2 siren alarms
before the siren becomes totally inactive.
1
2 3 4
6
7
8
11
13
15
17
19
INTRODUCTION
The PowerMaster-10
5
9
10
12
14
16
18
3