Visonic POWERMASTER-10 User Manual page 21

MENUS AND FUNCTIONS
To Program a User Code
1.
USER CODES
2.
user code 1
or
3.
user code 4
4.
user code 4
5.
user code 4 5327
☺
Return to step 3
1
For detailed instructions on how to select the setting options – refer to section B.1 and section B.2.
2
The display shows the 1
changed the default code 1111, we recommend that you change it now.
3
a. The display shows the user code currently programmed in this location (e.g. 5327).
b. The cursor blinks on the first digit of the code.
c. If the location is free the display will be blank ( - - - - ).
4
You can move the cursor to the next or previous digit using the (
Pressing the
5
The new code is now displayed without the cursor.
6
You can now repeat steps 3 - 5 to program or edit another user code. To end this session and to
select other menu options or to quit programming – follow the instructions in section B.2.
20
Enter the USER SETTINGS menu, select the [USER CODES] option and
press the
The first user code "user code 1" is displayed.
Click the
you wish to program, for example, "user code 4".
When the user code you wish to program appears on the display, press
to confirm.
To program or edit the code, use the numerical keypad to enter the 4 digit
327
code (e.g. 5327) at the position of the blinking cursor.
When done, press
A "Happy Tune"
Additional Information (section C.4)
st
User Code (Master User) in the list of 8 User Codes. If you have not yet
button erases the digit of the cursor + all digits right of the cursor.
1
button to confirm.
or button until the display reads the User Code
to confirm.
☺
sounds. The display confirms the saved code.
2
3 4
5 6
/ ) buttons.
D-302757