Visonic POWERMASTER-10 User Manual page 19

MENUS AND FUNCTIONS
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
a. The STATUS to the right of the zone number indicates whether the zone is READY, NOT-READY or
BYPASSED.
b. In the example on the right the display reads [
3
a. If the zone you selected is "not bypassed", the display prompts you to press [
the zone you selected is already "bypassed", the display prompts you to press [
b. To abort and return to the previous step press
4
The display now prompts you to press [
wish to abort and return to the User Setting menu, press
5
You can now repeat steps 2 - 5 to bypass or clear another zone. To end this session and to select other
menu options or to quit programming - follow the instructions in section B.2.
6
You can now select another option in the User Setting menu (see section B.1), or quit programming (see
section B.2).
18
Additional Information (section C.1 – C.3)
Z01: READY
<OK> TO RECALL
] alternating with [
Living Room
<OK> TO BYPASS
or
] i.e. to repeat the last used bypass scheme. If you
.
].
]. However, if
].
<OFF> TO CLEAR
D-302757