Visonic POWERMASTER-10 User Manual page 23

MENUS AND FUNCTIONS
B. To Delete a Keyfob
1.
KEYFOBS
2.
ADD NEW KEYFOB
3.
DELETE KEYFOB
K01:keyfob
4.
or
K06:keyfob
ID No. 300-5799
5.
<OFF> TO DELETE
6.
☺
Go to step 3
DELETE KEYFOB
1
The LED will extinguish after several seconds. In case of difficulties in communication with the
control panel, the LED may blink for several seconds more while trying to establish communication.
During this period of time the keyfob keys are disabled.
2
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
3
The display shows the 1
4
To abort enrollment press the
5
Before you delete a keyfob, identify the keyfob either by the keyfob No., for example, K06, or by the
ID number of the keyfob that appears on the display, and then make sure that it is the keyfob you
wish to delete.
6
If you regret and wish to abort the procedure, press the
7
Pre-Enrollment Procedure:
Step 4b enables you to register the device ID and to complete the programming process without
being in possession of the device itself (can also be performed off-site by the installer). Enrollment
can then be completed at a later stage by following the same enrollment procedure described in
Step 3 without entering the User Settings menu.
8
You can now delete another keyfob, select another option in the User Setting menu (see section B.1
and section B.2), or quit programming (see section B.3).
22
Enter the USER SETTINGS menu, select the [KEYFOBS] option and press
the button to confirm.
The display will read [ADD NEW KEYFOB].
Click the button until the display reads [DELETE KEYFOB].
Press to confirm.
The display will read [K01:Keyfob] in addition to the ID number of the keyfob.
Click the or
you wish to delete, for example, "K06:Keyfob" and "ID No. 300-5799".
When the keyfob you wish to delete appears on the display, press
The display now reads [<OFF> TO DELETE].
To delete the keyfob press the
☺
A "Happy Tune"
8
returns to step 3.
Additional Information (section C.5)
st
Keyfob (Keyfob No.1) of the 8 keyfobs.
button.
2
4
button until the display reads the Keyfob No.
6
button.
sounds and the display reads [
button.
3
5
.
] and
DELETE KEYFOB
D-302757