Programming Private Phone And Sms Reporting - Visonic POWERMASTER-10 User Manual

MENUS AND FUNCTIONS
C.10 Programming Private Phone and SMS Reporting
The PowerMaster-10 system can be programmed to send various event notification messages such as alarm,
arming or trouble events, to 4 private telephone subscribers by audible signal and if a GSM option is installed,
also to 4 SMS telephone numbers. These reports can be programmed either instead of or in addition to the
reports transmitted to the monitoring company.
Further details about the event notification by telephone and by SMS are provided in Chapter 6.
You can determine the number of times the private telephone number is dialed and whether a single
acknowledge signal will stop the reporting process or an acknowledge signal from each telephone will be
required before the current event is considered reported.
♦ Here you can program:
The specific events you wish the system to report.
st nd rd
The 1 , 2 , 3 , and 4
to private subscribers.
The number or redial attempts and your preferred acknowledge method.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
A. To Program Events to be Reported
1.
PRIVATE REPORT
2.
REPORTED EVENTS
disable report
3.
or
alarms
4.
alarms
☺
Return to step 2
B. To Program SMS Telephone Numbers
5.
REPORTED EVENTS
or
SMS REPORT TEL#
1st SMS tel#
6.
or
4th SMS tel#
26
th
private telephone and SMS numbers for reporting alarm and other event messages
Enter the USER SETTINGS menu and select the [
option and press the
The display will read [
enable the Private Reporting and to determine which events will be
2
reported. To enter this option press
The display shows the currently selected option.
Click the
group you wish to be reported, for example, [
When you are satisfied with the setting, press
A "Happy Tune"
reported, and returns to step 2.
Click the
] and press
TEL#
The display reads the 1st of the 4 Private SMS phone numbers.
Click the
phone number you wish to program or edit, for example, "4th SMS tel #",
and press
button to confirm.
] which is the first option used to
REPORT TO PRVT
or button until the display reads the event
☺
sounds. The display confirms the set events to be
4 10
or button until the display reads [
to confirm.
or button until the display reads the desired SMS
to confirm.
1
etc – see table
PRIVATE REPORT
1
2
.
3
3
].
alarms
4
to confirm.
SMS REPORT
]
D-302757