Visonic POWERMASTER-10 User Manual page 29

MENUS AND FUNCTIONS
or
17.
Tel. acknowledge
single ack
18.
or
all ack
all ack
☺
Return to step 17
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
This option allows you to program the events to be reported. If you wish to program telephone numbers or
SMS numbers, click the
3
The display shows the currently selected option (indicated by a
Using the
numbers or SMS numbers according to the options provided in the table bellow:
Event Group Option
disable report
all
all (-op/cl)
all (-alerts)
alarms
alerts
op/cl
Note: " " means all events including the L. BAT and AC FAIL trouble messages.
all
Note: All the above options can be reported to private telephone subscribers by SMS. When Voice Report
is enabled alarms and alerts only can be reported.
4
The symbol now appears next to the new selected option.
5
a. The display shows the phone number currently programmed in this location (for example,
1032759641). The cursor blinks on the first digit of the code.
b. If the location is free the display will be blank ( - - - - ).
6
You can move the cursor to the next or previous location (digit) using the
7
Within the SMS menu you can now repeat steps 6 -8 to program or edit another SMS phone number or; within
the private telephone menu, you can now repeat steps 10 – 11 to program or edit another phone number.
To end this session and return to previous menu options, press the
8
You can select between: "
9
You can select between:
" " – an acknowledge signal from only a single telephone will stop the reporting process.
single ack
" " - an acknowledge signal from all telephones is required to stop the reporting process.
all ack
10
You can now, select other options, end this session – (see section B.1 and section B.2), or quit
programming (see section B.3).
28
click the
acknowledge] and press
The display shows the currently selected option
Click the
acknowledge method, for example, "all ack".
A "Happy Tune"
method and returns to step 17.
Additional Information (section C.10)
or
or buttons you can now select the events you wish to be reported to private phone
Events to be reported
No message will be reported
All messages
All messages, except arming & disarming
All messages, except alerts
Alarm messages only
Alert messages only
Arming and disarming (Open/close) only
"; "
1 attempt 2 attempts
or button until the display reads [Tel.
to confirm.
or button until the display reads the desired
☺
sounds. The display confirms the set acknowledge
4 10
button until the display reads the option you wish.
symbol), for example, "
"; "
3 attempts
.
9
disable report
or
button.
"; " ".
4 attempts
".
button.
D-302757