Reviewing The Zone Bypass Scheme; Recalling The Zone Bypass Scheme - Visonic POWERMASTER-10 User Manual

B. To Clear a Bypassed Zone
6.
Z04: BYPASSED
7.
Kitchen
<OFF> TO CLEAR
8.
Z04: READY
C.2 Reviewing the Zone Bypass Scheme
♦ Here you can quickly review the Bypass Scheme i.e. the zones that are set to be bypassed during the next
arming session.
1.
REVIEW BYPASS
2.
BYPASS LIST
or
3.
Z04: BYPASSED
Kitchen
C.3 Recalling the Zone Bypass Scheme
♦ Use this option to repeat (recall) the most recent Bypassed Scheme for use during the next arming session.
1.
RECALL BYPASS
2.
<OK> TO RECALL
3.
Bypass RECALLED
☺
Return to step 1
D-302757
Repeat steps 1 to 2 above.
When the zone you wish to clear bypass appears on the display (for
example, "Z04"), press
by looking for the "it's me" LED indication on the displayed device.
The display now reads [<OFF> TO CLEAR].
To clear the bypassed zone press the
☺
A "Happy Tune" sounds and the updated zone status is now displayed,
i.e. [Z04: READY] or [Z04: NOT READY].
Enter the USER SETTINGS menu and select the [REVIEW BYPASS] option
and press the
The display reads [BYPASS LIST]
Click the or
zones in ascending numerical order. When done, click the
6
exit.
Enter the USER SETTINGS menu, select the [RECALL BYPASS] option and
press the button to confirm.
The display now reads [<OK> TO RECALL].
To recall the last used bypass scheme press
☺
A "Happy Tune" sounds. The display reads [
then returns to "
USER SETTINGS
MENUS AND FUNCTIONS
to confirm. You can also identify the device
3
6
1
button to confirm.
buttons repeatedly to review all bypassed
1
4
" step 1. 6
button.
button to
.
Bypass RECALLED
] and
17