Enabling / Disabling The Squawk Option - Visonic POWERMASTER-10 User Manual

C.11 Enabling / Disabling the Squawk Option
The PowerMaster-10 system (and its wireless sirens) can be set to produce a short "Squawk" of audible feedback
to assist you when you use your keyfob to arm (1 beep) and disarm (2 beeps) the PowerMaster-10 system
(operates in a similar manner to a car alarm).
♦ Here you can enable / disable the Squawk.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
1.
SQUAWK
Squawk ON
2.
or
Squawk OFF
3.
SQUAWK OFF
☺
Return to step 1
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
a. The display shows the currently selected setting (indicated by a
b. You can now enable (ON) or disable (OFF) the Squawk option using the
3
The symbol now appears next to the new selected option.
4
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
D-302757
Enter the USER SETTINGS menu, select the [
press the button to confirm.
The display shows the currently selected setting.
Click the or
setting, for example, "Squawk OFF" and press the
confirm.
☺
A "Happy Tune" sounds. The display confirms the saved setting,
then returns to the User Setting menu, step 1.
Additional Information (section C.11)
MENUS AND FUNCTIONS
SQUAWK
1
2
button until the display reads the desired
3 4
symbol), for example, "
or
1
etc – see table
] option and
button to
".
Squawk ON
button.
29