Entering The User Settings Menu & Selecting A Setting Option - Visonic POWERMASTER-10 User Manual

B.1 Entering the User Settings Menu & Selecting a Setting Option
The following procedure describes how to enter and move within the User Settings menu.
Detailed descriptions of the User Setting options are provided at the end of the procedure.
To exit the User Settings menu – see section B.3.
1. You can enter the "User Settings" menu only when the system is disarmed.
2. Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
A. To Enter the User Settings Menu
1.
READY 00:00
2.
USER SETTINGS
ENTER CODE:
CODE
3.
SET BYPASS
B. To Select a Setting Option
5.
SET BYPASS
or
6.
TIME & FORMAT
Continue to the selected
setting option in C.1 - C.12
1
Display shown in disarm state when all zones are secured (00:00 or other digits show present time).
2
a. If you have not already changed your personal code number, use the default setting – 1111.
b. The Master User has access to all User Settings options. All other users have access only to the Bypass
options.
3
The bypass options will be displayed in the User Settings menu only if enabled by the installer. Otherwise, the
first user setting option displayed will be [
D-302757
Make sure the system is disarmed and then press the
repeatedly until the display reads "USER SETTINGS".
Press to confirm
The screen will now prompt you to enter your user code.
2
Enter your User Code.
The display reads the first Setting option of the User Settings menu
3
[SET BYPASS].
Click the or
setting option, for example, "TIME & FORMAT".
When the desired setting option appears on the display, press the
button to enter the setting process.
The remainder of the procedures for the selected setting options is provided
in sections C.1 to C.12.
Additional Information (section B.1)
].
USER CODES
MENUS AND FUNCTIONS
button until the display reads the desired
1 etc – see
button
1
13