Setting The Date & Date Format - Visonic POWERMASTER-10 User Manual

MENUS AND FUNCTIONS
C.7 Setting the Date & Date Format
♦ Here you can program or adjust the built-in-calendar to show the correct date in the desired date format.
♦ You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
A. To Set the Date Format
1.
DATE & FORMAT
2.
DATE MM/DD/YYYY
or
DATE DD/MM/YYYY
3.
7
B. To Set the Date
4.
Date:30/12/2007
5.
DATE 20/02/2008
☺
Return to step 2
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
The display shows the currently selected format (indicated by a
You can now select either the "mm/dd/yyyy" or "dd/mm/yyyy" date format using the
button.
3
The display shows the Date and selected Date Format, for example, "
blinking on the first digit.
4
You can move the cursor to the next or previous digit using the
5
For the year, enter the two last digits only.
6
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
7
This setting can be performed only after completing steps 1 – 3 of section C.7A.
24
Enter the USER SETTINGS menu and select the [DATE & FORMAT] option
and press the
The display shows the currently selected date format.
Click the or
format, for example, "DD/MM/YYYY" and press
Use the numerical keypad to enter the correct date, for example,
"20.02.2008" at the position of the blinking cursor.
When you are satisfied with the setting, press
☺
A "Happy Tune" sounds, the display shows the set date and returns to
step 2 and shows the selected date format.
Additional Information (section C.7)
1
button to confirm.
button until the display reads the desired date
6
symbol), for example, "mm/dd/yyyy".
30.12.2007
or
1
etc – see table
2
to confirm.
3 4 5
to confirm.
or
", with the cursor
button.
D-302757