Setting The Time & Time Format - Visonic POWERMASTER-10 User Manual

C.6 Setting the Time & Time Format
♦ Here you can program or adjust the built-in-clock to show the correct time in the desired time format.
♦ You can select between a 24 hour and a 12 hour (AM/PM) time format.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
A. To Set the Time Format
1.
TIME & FORMAT
2.
EU FORMAT-24H
or
US FORMAT-12H
3.
5
B. To Set the Time
4.
TIME 12:40P
5.
TIME 08:55A
☺
Return to step 2
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
a. The display shows the currently selected format (indicated by a
b. You can now select either the 12 Hrs or 24 Hrs time format using the
3
The display shows the Time in the selected Time Format, for example, "
blinking on the first hour digit "1". The letter that follows the displayed time indicates one of the following:
"A" = AM; "P" = PM and "none" for 24 Hrs time format.
When the curser is positioned on the AM/PM digit, you can set to "AM" with the
"PM" with the
4
You can move the cursor to the next or previous digit using the
5
This setting can be performed only after completing steps 1 – 3 of section C.6A.
6
The time saved is displayed without the cursor, for example, "
format.
7
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
D-302757
Enter the USER SETTINGS menu and select the [TIME & FORMAT] option
and press the
The display shows the currently selected time format.
Click the
format, for example, "US FORMAT-12H" and press
Use the numerical keypad to enter the correct time, for example, "08:55 AM"
at the position of the blinking cursor.
When you are satisfied with the setting, press
A "Happy Tune"
2 and then reads the selected time format.
Additional Information (section C.6)
button
MENUS AND FUNCTIONS
1
button to confirm.
or button until the display shows the desired time
4
☺
sounds, the display reads the set time, returns to step
symbol), for example, "
08:55 A
1
etc – see table
2
to confirm .
to confirm.
6 7
24 Hrs
or buttons.
", with the cursor
12:40 PM
button and the
or buttons.
" followed by the selected time
".
23