Setting The Time & Time Format - Visonic PowerMaster-10 G2 User Manual

MENUS AND FUNCTIONS
B.8 Setting the Time & Time Format
♦ Here you can program or adjust the built-in-clock to show the correct time in the desired time format.
♦ You can select between a 24 hour and a 12 hour (AM/PM) time format.
Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
A. To Set the Time Format
1.
TIME & FORMAT
2.
US FORMAT 12H
or
EU FORMAT-24H
3.
5
B. To Set the Time
4.
TIME 12:40P
5.
TIME 08:55A
☺ Return to step 2
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2..
2
a. The display shows the currently selected format (indicated by a
b. You can now select either the 12 Hrs or 24 Hrs time format using the
3
The display shows the Time in the selected Time Format, for example, "
blinking on the first hour digit "1". The letter that follows the displayed time indicates one of the following:
"A" = AM; "P" = PM and "none" for 24 Hrs time format.
When the curser is positioned on the AM/PM digit, you can set to "AM" with the
"PM" with the
4
You can move the cursor to the next or previous digit using the
5
This setting can be performed only after completing steps 1 – 3 of section B.8A.
6
The time saved is displayed without the cursor, for example, "
format.
7
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
32
Enter the [USER SETTINGS] menu and select the [TIME & FORMAT] option
and press
The display shows the currently selected time format.
Click the
format, for example, "EU FORMAT-24H" and press
At the blinking cursor position, enter the correct time, for example, "8:55A",
using the numerical keypad.
When you are satisfied with the setting, press
A "Happy Tune"
and then reads the selected time format.
Additional Information (section B.8)
button
1
.
or button until the display shows the desired time
3 4
sounds, the display reads the set time, returns to step 2
☺
symbol), for example, "
08:55 A
" followed by the selected time
D-304829 PowerMaster-10/30 G2 User's Guide
1
2
to confirm .
to confirm.
6, 7
24 Hrs
or buttons.
12:40 PM
", with the cursor
button and the
or buttons.
etc – see
".