Setting Arming Time; Enabling The Squawk Option; Setting Time And Time Format - Visonic POWERMAXCOMPLETE User Manual

You may now select any other item on USERS
SETTINGS menu or quit programming process by
clicking . When "<OK> TO EXIT" is
displayed, click

Setting Arming Time

Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until
the display will read:
AUTO ARM TIME
From here, proceed as follows:
PRESS RESULTANT DISPLAY
arm time_ _ : _ _ A
[time
digits] (e.g.
arm time 12:55 A
12:55 A)
arm time 12:55 A
AUTO ARM TIME
Notes:
1. For 12h/24h time format selection, refer to
Setting Time and Time Format below.
2. Press " " to enter A (AM), or press "#" to enter P
(PM).

Enabling the Squawk Option

You can determine that the system will activate (or
not activate) high/mid/low wireless siren sound, for a
short time, upon arming (1 beep) and disarming (2
beeps), by keyfob only.
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
the button (repeatedly, if necessary)
until the display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
If not satisfied -
If not satisfied -
D-302755
.
RESULTANT DISPLAY
squawk disable
(if this is the current option)
squawk low volume
squawk mid volume
USER SETTINGS
If not satisfied
If satisfied
For wireless siren, refer to "low", "mid" and "hi"
options as "squawk enable".
You may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking . When "<OK> TO EXIT" is
displayed, click

Setting Time and Time Format

Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS RESULTANT DISPLAY
US FORMAT - 12H
(if this is the current option)
TIME
(time
digits] (e.g.
TIME
12:55A)
TIME
Note: To enter "A" - press [ ] or to enter "P" - press [#].
B. If 24h format is desired, continue as follows:
PRESS RESULTANT DISPLAY
US FORMAT - 12H
EU FORMAT - 24H
TIME
[time
TIME
digits] (e.g.
19:55)
TIME
TIME
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
squawk hi volume
squawk hi volume
.
_ _ : _ _ A
12:55A
HH:MM A
_ _ : _ _
19:55
19:55
HH:MM
31