USER SETTINGS
Setting Time and Time Format
Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
US FORMAT - 12H
(if this is the current option)
TIME
(time
digits] (e.g.
TIME
12:55A)
TIME
Note: To enter "A" - press [ ] or to enter "P" - press [#].
B. If 24h format is desired, continue as follows:
PRESS
RESULTANT DISPLAY
US FORMAT - 12H
EU FORMAT - 24H
TIME
[time
TIME
digits] (e.g.
19:55)
TIME
TIME
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
34
_ _ : _ _ A
12:55A
HH:MM A
_ _ : _ _
19:55
19:55
HH:MM
Setting the Date and Date Format
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until
the display will read SET DATE&FORMAT.
From here, proceed as follows:
PRESS
RESULTANT DISPLAY
DATE MM/DD/YYYY
If not satisfied
press
DATE DD/MM/YYYY
DATE _ _ / _ _ /_ _ _ _
[Enter
date]
DATE 01/01/2002
(e.g.
01/01/2002)
DATE 01/01/2002
DATE DD/MM/YYYY
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
.
.
Scheduler Function
The Scheduler enables to start and stop activity of
the desired devices. You can select the day (Sunday,
Monday, Tuesday, Wednesday, Thursday, Friday,
Saturday, or daily) and then select the scheduled
activity start/stop of the desired device. The process
is demonstrated in "figure 8 DETAIL A".
D-302542