Enabling The Squawk Option; Setting Time And Time Format; Setting The Date And Date Format - Visonic PowerMaxExpress User Manual

Notes:
1. For 12h/24h time format selection, refer to
Setting Time and Time Format below.
2. Press "" to enter A (AM), or press "#" to enter P
(PM).

Enabling the Squawk Option

You can determine that the system will activate (or
not activate) high/mid/low wireless siren sound, for a
short time, upon arming (1 beep) and disarming (2
beeps), by keyfob, or by MCM-140 keypad (if
enabled in the keypad configuration).
Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
the button (repeatedly, if necessary) until
the display will read:
SQUAWK OPTION
From here, proceed as follows:
PRESS
I OK
If not satisfied -
If not satisfied -
If not satisfied
If satisfied
I OK
For wireless siren, refer to "low", "mid" and "hi"
options as "squawk enable".
You may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking . When "<OK> TO EXIT" is displayed,
I OK
click .

Setting Time and Time Format

Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS RESULTANT DISPLAY
US FORMAT - 12H
I OK
(if this is the current option)
I OK
TIME
D-303974 PowerMaxExpress User's Guide
RESULTANT DISPLAY
squawk disable
(if this is the current option)
squawk low volume
squawk mid volume
squawk hi volume
squawk hi volume
_ _ : _ _ A
USER SETTINGS
(time
digits] (e.g.
TIME
12:55A)
I OK
TIME
Note: To enter "A" - press [
B. If 24h format is desired, continue as follows:
PRESS RESULTANT DISPLAY
I OK US FORMAT - 12H
EU FORMAT - 24H
I OK TIME
[time
TIME
digits] (e.g.
19:55)
I OK TIME
I OK TIME
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
I OK
.

Setting the Date and Date Format

Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
button (repeatedly, if necessary) until the
display will read SET DATE&FORMAT.
From here, proceed as follows:
PRESS
I OK
If not satisfied
press
I OK
[Enter date] (e.g.
01/01/2002)
I OK
I OK
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
. When <OK> TO EXIT is displayed - click
I OK
.
12:55A
HH:MM A

] or to enter "P" - press [#].
_ _ : _ _
19:55
19:55
HH:MM
RESULTANT DISPLAY
DATE MM/DD/YYYY
DATE DD/MM/YYYY
DATE _ _ / _ _ /_ _ _ _
DATE 01/01/2002
DATE 01/01/2002
DATE DD/MM/YYYY
25