Table of Contents
Advertisement
MENUS AND FUNCTIONS
B. To set the time
5
4.
TIME
12:40P
5.
TIME
08:55A
☺
Return to step 2
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2..
2
a. The display shows the currently selected format (indicated by a
b. You can now select either the 12 Hrs or 24 Hrs time format using the
3
The display shows the Time in the selected Time Format, for example, "
blinking on the first hour digit "1". The letter that follows the displayed time indicates one of the following:
"A" = AM; "P" = PM and "none" for 24 Hrs time format.
When the curser is positioned on the AM/PM digit, you can set to "AM" with the
"PM" with the
4
You can move the cursor to the next or previous digit using the
5
This setting can be performed only after completing steps 1 – 3 of section B.8A.
6
The time saved is displayed without the cursor, for example, "
format.
7
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
B.9 Setting the date & format
Here you can program or adjust the built-in-calendar to show the correct date in the required date format.
You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format.
Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
A. To Set the date format
1.
DATE & FORMAT
DATE DD/MM/YYYY
or
2.
DATE MM/DD/YYYY
3.
B. To set the date
7
4.
DATE 04/20/2014
5.
DATE 04/20/2014
☺
Return to step 2
28
At the blinking cursor position, enter the correct time, for example, "8:55A",
using the numerical keypad.
When you are satisfied with the setting, press
A "Success Tune"
2 and then reads the selected time format.
Additional Information (section B.8)
button
Enter the [USER SETTINGS] menu and select the [DATE & FORMAT] option
and press
The display shows the currently selected date format.
Click the
format, for example, "MM/DD/YYYY" and press
At the blinking cursor position, enter the correct date, for example,
"04/20/2014", using the numerical keypad.
When you are satisfied with the setting, press
A "Success Tune"
step 2 and shows the selected date format.
3, 4
☺
sounds, the display reads the set time, returns to step
symbol), for example, "
" followed by the selected time
08:55 A
.
1
or
button until the display reads the desired date
☺
sounds, the display shows the set date and returns to
D-307082 PowerMaster 360 User's Guide
to confirm.
6, 7
24 Hrs
or
buttons.
12:40 PM
", with the cursor
button and the
or
buttons.
1
2
to confirm.
3, 4, 5
to confirm.
6
".
etc. – see
Advertisement
Table of Contents
