Setting The Time & Time Format - Visonic PowerMax10 User Manual

Fully supervised wireless alarm control system
Table of Contents

Advertisement

C.6 Setting the Time & Time Format
♦ Here you can program or adjust the built-in-clock to show the correct time in the desired time format.
♦ You can select between a 24 hour and a 12 hour (AM/PM) time format.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
A. To Set the Time Format
Enter the USER SETTINGS menu and select the [TIME & FORMAT] option.
When the display reads [SET TIME & FORMAT] press
The display shows the currently selected time format.
a) Click the
desired time format, for example, "US FORMAT-12H".
b) When the desired time format appears on the display, press
to confirm.
8 3
B. To Set the Time
a) Use the numerical keypad to enter the correct time, for example,
"08:55 AM" at the position of the blinking cursor.
b) Use the
- 12 H" was selected).
c) When you are satisfied with the setting, press
A "Happy Tune"
1
For detailed instructions on how to select the Setting Options – refer to section B.1 and section B.2.
2
a. The display shows the currently selected format (indicated by a
b. You can now select either the 12 Hrs or 24 Hrs time format using the
3
The display shows the Time and selected Time Format, for example, "
on the first hour digit "0".
4
a. When the cursor blinks on "h", this indicates hour digit and "m", this indicates minute digit.
b. You can move the cursor to the next or previous digit using the
5
Use the
button to toggle between AM and PM formats.
6
a. The time is displayed without the cursor, for example, "
b. The letter that follows the displayed time indicates one of the following:
"A" = AM; "P" = PM and "none" for 24 Hrs time format.
7
You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit
programming (see section B.3).
8
This setting can be performed only after completing steps
D-302757
or
button until the display reads the
button to toggle between AM & PM (if "US FORMAT
sounds to confirm the set time.
Additional Information (section C.10)
MENUS AND FUNCTIONS
1
I
OK
.
2
I
OK
4 5
I
OK
to confirm.
7 6
symbol), for example, "
12:40 PM
".
08:55 A
-
of section C.10A.
1
etc – see table
TIME & FORMAT
I
OK
EU FORMAT-24H
or
US FORMAT - 12 H
I
OK
TIME
12:40P
I
OK
US FORMAT-12H
24 Hrs
or
buttons.
", with the cursor blinking
or
buttons.
".
25

Advertisement

Table of Contents
loading

Table of Contents