Setting The Date & Date Format - Visonic PowerMaster-10 G2 User Manual

B.9 Setting the Date & Date Format
♦ Here you can program or adjust the built-in-calendar to show the correct date in the desired date format.
♦ You can select between a "mm/dd/yyyy" and a "dd/mm/yyyy" date format.
Carefully read the section titled "Additional Information" according to the indicated references
table at end of this section.
A. To Set the Date Format
1.
DATE & FORMAT
DATE MM/DD/YYYY
2.
or
DATE DD/MM/YYYY
3.
7
B. To Set the Date
4.
DATE 20/04/2011
5.
DATE 20/04/2011
☺ Return to step 2
1
For detailed instructions on how to select User Settings – refer to sections A.1 and A.2.
2
The display shows the currently selected format (indicated by a
You can now select either the "MM/DD/YYYY" or "DD/MM/YYYY" date format by pressing
.
3
The display shows the Date and selected Date Format, for example, "
on the first digit.
4
You can move the cursor to the next or previous digit using the
5
For the year, enter the two last digits only.
6
You can now select another option in the User Settings menu (see section A.1 and section A.2), or quit
programming (see section A.3).
7
This setting can be performed only after completing steps 1 – 3 of section B.9A.
D-304829 PowerMaster-10/30 G2 User's Guide
Enter the [USER SETTINGS] menu and select the [DATE & FORMAT] option
1
and press .
The display shows the currently selected date format.
Click the or
format, for example, "DD/MM/YYYY" and press
At the blinking cursor position, enter the correct date, for example,
"20/04/2011", using the numerical keypad.
When you are satisfied with the setting, press
A "Happy Tune" ☺ sounds, the display shows the set date and returns to
step 2 and shows the selected date format.
Additional Information (section B.9)
MENUS AND FUNCTIONS
button until the display reads the desired date
3, 4, 5
6
symbol), for example, "MM/DD/YYYY".
30.12.2007
", with the cursor blinking
or
1
etc – see
2
to confirm.
to confirm.
or
button.
33