Setting Time And Time Format; Setting The Date And Date Format - Visonic PowerMaxComplete User Manual

USER SETTINGS
From here, proceed as follows:
PRESS RESULTANT DISPLAY
squawk disable
(if this is the current option)
If not satisfied -
squawk low volume
If not satisfied -
squawk mid volume
If not satisfied
squawk hi volume
If satisfied
squawk hi volume
For wired siren, refer to "low", "mid" and "hi" options
as "squawk enable".
You may now select any other item on the USERS
SETTINGS menu or quit the programming process by
clicking . When "<OK> TO EXIT" is
displayed, click .

Setting Time and Time Format

Having entered your Master User Code successfully
(see Entering the User Settings Menu, above), click
until the display reads:
SET TIME&FORMAT
A. If 12h format is desired, continue as follows:
PRESS RESULTANT DISPLAY
US FORMAT - 12H
(if this is the current option)
TIME
(time
digits] (e.g.
TIME
12:55A)
TIME
Note: To enter "A" - press [ ] or to enter "P" - press [#].
28
B. If 24h format is desired, continue as follows:
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking

Setting the Date and Date Format

Having entered your Master User Code successfully
(see above - Entering the User Settings Menu), click
the display will read SET DATE&FORMAT.
From here, proceed as follows:
_ _ : _ _ A
12:55A
HH:MM A
You may now select any other item on the USER
SETTINGS menu or quit programming by clicking
PRESS RESULTANT DISPLAY
US FORMAT - 12H
EU FORMAT - 24H
TIME
[time
TIME 19:55
digits] (e.g.
19:55)
TIME 19:55
TIME HH:MM
. When <OK> TO EXIT is displayed - click
.
button (repeatedly, if necessary) until
PRESS RESULTANT DISPLAY
DATE MM/DD/YYYY
If not satisfied
press
DATE DD/MM/YYYY
DATE _ _ / _ _ /_ _ _ _
[Enter date]
DATE 01/01/2002
(e.g.
01/01/2002)
DATE 01/01/2002
DATE DD/MM/YYYY
. When <OK> TO EXIT is displayed - click
.
_ _ : _ _
D-300886