ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 2-1. Setup Wizard Step 1: LAN Settings (continued)
Setting
DNS Proxy
Enable DNS Proxy
Setup Wizard Step 2 of 10: WAN Settings
Figure 2-8
Enter the settings as explained in
screen.
Using the Setup Wizard to Provision the UTM in Your Network
Description (or Subfield and Description)
This is optional. Select the Enable DNS Proxy radio button to enable the UTM
to provide a LAN IP address for DNS address name resolution. This setting is
enabled by default.
Note: When you deselect the Enable DNS Proxy radio button, the UTM still
services DNS requests that are sent to its LAN IP address unless you disable
DNS Proxy in the firewall settings (see
Table 2-2 on page
v1.0, September 2009
"Attack Checks" on page
2-12, then click Next to go the following
5-20).
2-11