NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 101

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Adding PCs or Devices to the Network Database
To add PCs or devices manually to the Network Database:
1. In the Add Known PCs and Devices section of the LAN Groups screen (see
page 4-14), enter the settings as explained in
Table 4-2. Add Known PCs and Devices Settings
Setting
Name
IP Address Type
IP Address
MAC Address
Group
Profile Name
2. Click the add table button to add the PC or device to the Known PCs and Devices table.
LAN Configuration
Description (or Subfield and Description)
Enter the name of the PC or device.
From the pull-down menu, select how the PC or device receives it IP address:
• Fixed (set on PC). The IP address is statically assigned on the PC or device.
• Reserved (DHCP Client). Directs the UTM's DHCP server to always assign
the specified IP address to this client during the DHCP negotiation (see
"Setting Up Address Reservation" on page
Note: When assigning a reserved IP address to a client, the IP address
selected must be outside the range of addresses allocated to the DHCP
server pool.
Enter the IP address that this PC or device is assigned in the IP Address field. If
the IP Address Type is Reserved (DHCP Client), the UTM reserves the IP
address for the associated MAC address.
Enter the MAC address of the PC or device's network interface. The MAC
address format is six colon-separated pairs of hexadecimal characters (0-9 and
A-F), such as 01:23:45:67:89:AB.
From the pull-down menu, select the group to which the PC or device is
assigned. (Group 1 is the default group.)
From the pull-down menu, select the VLAN profile to which the PC or device is
assigned. (The defaultVlan is the default VLAN group.)
v1.0, September 2009
Table 4-2.
4-17).
Figure 4-5 on
4-15