NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 280

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 8-5. SSL VPN Wizard Step 5:
Item
TCP Port NumberAction
Add New Host Name for Port Forwarding
Local Server IP Address
Fully Qualified Domain
NameAction
a. Users can specify the port number together with the host name or IP address.
8-12
Port Forwarding
Description (or Subfield and Description)
The TCP port number of the application that is accessed through the SSL
VPN tunnel. Below are some commonly used TCP applications and port
numbers.
FTP Data (usually not needed)
FTP Control Protocol
SSH
Telnet
SMTP (send mail)
HTTP (web)
POP3 (receive mail)
NTP (network time protocol)
Citrix
Terminal Services
VNC (virtual network computing)
The IP address of an internal server or host computer that you want to name.
Note: Both Local Server IP Address fields on this screen (that is, the one in
the Add New Application for Port Forwarding section and the one in the Add
New Host Name for Port Forwarding section) must contain the same IP
address.
The full server name, that is, the "host-name-to-IP-address-resolution" for the
network server as a convenience for remote users.
Virtual Private Networking Using SSL Connections
v1.0, September 2009
Settings (continued)
20
21
22
a
23
a
25
80
110
123
1494
3389
5900 or 5800