ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Figure 11-5
3. Enter the settings as explained in
Table 11-4. Alerts Settings
Setting
Enable Update
Failure Alerts
Enable License
Expiration Alerts
Enable Malware
Alerts
Monitoring System Access and Performance
Table
11-4.
Description (or Subfield and Description)
Select this checkbox to enable update failure alerts.
Select this checkbox to enable license expiration alerts. This checkbox is enabled by
default.
Select this checkbox to enable malware alerts, and configure the Subject and
Message fields.
v1.0, September 2009
11-11