Table of Contents
Advertisement
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 8-10.
Add Policy
Item
Description (or Subfield and Description)
Add SSL VPN Policies
Apply
Select one of the following radio buttons to specify how the policy is applied:
Policy For
• Network Resource. The policy is applied to a network resource that you have defined
on the Resources screen (see
page
Resource fields below.
• IP Address. The policy is applied to a single IP address. The screen adjust to unmask
the fields that are shown in the IP Address fields below.
• IP Network. The policy is applied to a network address. The screen adjust to unmask
the fields that are shown in the IP Network fields below.
• All Addresses. The policy is applied to a all address. The screen adjust to unmask the
fields that are shown in the All Addresses fields below.
Network
Resource
IP Address
Virtual Private Networking Using SSL Connections
Settings (continued)
8-28). The screen adjust to unmask the fields that are shown in the Network
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
Defined
From the pull-down menu, select the network resource that
Resources
you have defined on the Resources screen (see
Network Resource Objects to Simplify Policies" on
page
Permission
From the pull-down menu, select whether the policy permits
(PERMIT) or denies (DENY) access.
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
IP Address
The IP address to which the SSL VPN policy is applied.
Port Range /
A port (enter in the Begin field) or a range of ports (enter in
Port Number
the Begin and End fields) to which the SSL VPN policy is
applied. Ports can be 0 through 65535. The policy is applied
to all TCP and UDP traffic that passes on those ports. Leave
the fields blank to apply the policy to all traffic.
Service
From the pull-down menu, select the service to which the
SSL VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission
From the pull-down menu, select whether the policy permits
(PERMIT) or denies (DENY) access.
v1.0, September 2009
"Using Network Resource Objects to Simplify Policies" on
8-28).
"Using
8-35
Advertisement
Table of Contents
Troubleshooting
