Netgear Vpn Client Status And Log Information - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Figure 7-15
In the example that is shown in
connected to My Connections\UTM_SJ" within 30 seconds.
The VPN client icon in the system tray should say On:

NETGEAR VPN Client Status and Log Information

To view more detailed additional status and troubleshooting information from the NETGEAR
VPN client:
• Right-click the VPN Client icon in the system tray and select Log Viewer (see
page 7-2).
Virtual Private Networking Using IPsec Connections
Figure 7-15, you should receive the message "Successfully
v1.0, September 2009
Figure 7-2 on
7-17