NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 131

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
DMZ WAN Inbound Services Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules are listed. By default, all inbound traffic (from the Internet to the DMZ) is allowed.
Inbound rules that are configured on the LAN WAN Rules screen take precedence over inbound
rules that are configured on the DMZ WAN Rules screen. As a result, if an inbound packet
matches an inbound rule on the LAN WAN Rules screen, it is not matched against the inbound
rules on the DMZ WAN Rules screen.
To create a new inbound DMZ WAN service rule:
1. In the DMZ WAN Rules screen, click the add table button under the Inbound Services table.
The Add DMZ WAN Inbound Service screen displays.
Figure 5-7
2. Enter the settings as explained in
3. Click Apply to save your changes. The new rule is now added to the Inbound Services table.
Firewall Protection
Table 5-3 on page 5-8.
v1.0, September 2009
5-17