NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 311

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 9-2. Add Domain Settings (continued)
Setting
Authentication Type
(continued)(
Select Portal
Authentication Server The server IP address or server name of the authentication server for any type
Authentication Secret The authentication secret or password that is required to access the
Workgroup
LDAP Base DN
Active Directory
Domain
4. Click Apply to save your settings. The domain is added to the List of Domains table.
5. If you use local authentication, make sure that it is not disabled: select the No radio button in
the Local Authentication section of the Domain screen (see
Note: A combination of local and external authentication is supported.
Warning: If you disable local authentication, make sure that there is at least one
Managing Users, Authentication, and Certificates
Description (or Subfield and Description)
• WIKID-CHAP. WIKID Systems CHAP. Complete the Authentication Server
and Authentication Secret fields.
• MIAS-PAP. Microsoft Internet Authentication Service (MIAS)
the Authentication Server and Authentication Secret fields.
• MIAS-CHAP. Microsoft Internet Authentication Service (MIAS) CHAP.
Complete the Authentication Server and Authentication Secret fields.
• NT Domain. Microsoft Windows NT Domain. Complete the Authentication
Server and Workgroup fields.
• Active Directory. Microsoft Active Directory. Complete the Authentication
Server and Active Directory Domain fields.
• LDAP. Lightweight Directory Access Protocol (LDAP). Complete the
Authentication Server and LDAP Base DN fields.
The pull-down menu shows the SSL portals that are listed on the Portal Layout
screen. From the pull-down menu, select the SSL portal with which the domain
is associated. For information about how to configure SSL portals, see
"Creating the Portal Layout" on page
of authentication other than authentication through the local user database.
authentication server for RADIUS, WIKID, or MIAS authentication.
The workgroup that is required for Microsoft NT Domain authentication.
The LDAP base distinguished name (DN) that is required for LDAP
authentication.
The active directory domain name that is required for Microsoft Active Directory
authentication.
external administrative user otherwise access to the UTM25 is blocked.
v1.0, September 2009
8-18.
Figure 9-1 on page
PAP. Complete
9-3).
9-5