Additional Wan-Related Configuration Tasks - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 3-8. Advanced WAN Settings (continued)
Setting
Use this MAC Address
Upload/Download Settings
These settings rate-limit the traffic that is being forwarded by the UTM.
WAN Connection Type
WAN Connection Speed
Upload
WAN Connection Speed
Download
4. Click Apply to save your changes.
Note: Depending on the changes that you make, when you click Apply, the UTM
might restart, or services such as HTTP and SMTP might restart.
Note: For the UTM25 only, to configure advanced WAN options for WAN2 port, select
Network Config > WAN Settings from the menu. The WAN Settings tabs appear,
with the WAN1 ISP Settings screen in view. Now, click the WAN2 ISP Settings
tab and then the Advanced option arrow. The WAN2 Advanced Options screen
displays.

Additional WAN-Related Configuration Tasks

• If you want the ability to manage the UTM remotely, enable remote management (see
"Configuring Remote Management Access" on page
management, NETGEAR strongly recommend that you change your password (see
Passwords and Administrator Settings" on page
• You can set up the traffic meter for each WAN, if desired. See
Meter" on page 11-1.
3-24
Description (or Subfield and Description)
Select the Use this MAC Address radio button to manually enter the
MAC address in the field next to the radio button. You would typically enter
the MAC address that your ISP is requiring for MAC authentication.
Note: The format for the MAC address is 01:23:45:67:89:AB (numbers 0-9
and either uppercase or lowercase letters A-F). If you enter a MAC
address, the existing entry is overwritten.
From the pull-down menu, select the type of connection that the UTM uses
to connect to the Internet: DSL, ADLS, Cable Modem, T1, T3, or Other.
From the pull-down menu, select the maximum upload speed that is
provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can
select Custom and enter the speed in Kbps in the field to the right.
From the pull-down menu, select the maximum download speed that is
provided by your ISP. You can select from 56 Kbps to 1 Gbps, or you can
select Custom and enter the speed in Kbps in the field to the right.
10-9).
Manually Configuring Internet and WAN Settings
v1.0, September 2009
10-12). If you enable remote
"Enabling the WAN Traffic
"Changing