NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 54

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Enter the settings as explained in
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the content filtering settings by selecting Application Security > HTTP/HTTPS
> Content Filtering. The Content Filtering screen lets you specify additional
filtering tasks and notification settings. For more information about these settings,
see "Configuring Web Content Filtering" on page
Table 2-7. Setup Wizard Step 7: Content Filtering Settings
Setting
Blocked Web Categories
Select the Enable Blocking checkbox to enable blocking of Web categories. By default, this checkbox is
deselected.
Select the checkboxes of any Web categories that you want to block. Use the action buttons at the top of
the section in the following way:
• Allow All. All Web categories are allowed.
• Block All. All Web categories are blocked.
• Set to Defaults. Blocking and allowing of Web categories are returned to their default settings. See
Table 6-1 on page 6-2
that are preceded by a green rectangular are allowed by default; categories that are preceded by a pink
rectangular are blocked by default.
Blocked Categories Scheduled Days
Make one of the following selections:
• Select the All Days radio button to enable content filtering to be active all days of the week.
• Select the Specific Days radio button to enable content filtering to be active on the days that are specified
by the checkboxes.
Blocked Categories Time of Day
Make one of the following selections:
• Select the All Day radio button to enable content filtering to be active all 24 hours of each selected day.
• Select the Specific Times radio button to enable content filtering to be active during the time that is
specified by the Start Time and End Time fields for each day that content filtering is active.
2-22
Table 2-7, then click Next to go the following screen.
Description (or Subfield and Description)
for information about the Web categories that are blocked by default. Categories
Using the Setup Wizard to Provision the UTM in Your Network
v1.0, September 2009
6-23.