NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 29

Prosecure unified threat management
Table of Contents

Advertisement

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 1-1. LED Descriptions (continued)
Object
Activity
LAN Ports
Left LED
Off
On (Green)
Blink (Green)
Right LED
Off
On (Amber)
On (Green)
DMZ LED
Off
On (Green)
WAN Ports
Left LED
Off
On (Green)
Blink (Green)
Right LED
Off
On (Amber)
On (Green)
Active LED
Off
(UTM25
On (Green)
only)
Introduction
Description
The LAN port has no link.
The LAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the LAN port.
The LAN port is operating at 10 Mbps.
The LAN port is operating at 100 Mbps.
The LAN port is operating at 1000 Mbps.
Port 4 is operating as a normal LAN port.
Port 4 is operating as a dedicated hardware DMZ port.
The WAN port has no physical link, that is, no Ethernet cable is
plugged into the UTM.
The WAN port has a valid connection with a device that provides an
Internet connection.
Data is being transmitted or received by the WAN port.
The WAN port is operating at 10 Mbps.
The WAN port is operating at 100 Mbps.
The WAN port is operating at 1000 Mbps.
The WAN port is either not enabled or has no link to the Internet.
The WAN port has a valid Internet connection.
v1.0, September 2009
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosecure utm10Prosecure utm25

Table of Contents