Traffic Metering Logs; Unicast Logs - NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Traffic Metering Logs

This section describes logs that are generated when the traffic meter has reached a limit.
Table C-13. System Logs: Traffic Metering
Message
Explanation
Recommended Action

Unicast Logs

This section describes logs that are generated when the UTM processes unicast packets.
Table C-14. System Logs: Unicast
Message
Explanation
Recommended Action
ICMP Redirect Logs
This section describes logs that are generated when the UTM processes ICMP Redirect messages.
Table C-15. System Logs: Unicast, Redirect
Message
Explanation
Recommended Action
System Logs and Error Messages
Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of
10 MB has reached for WAN1._
Logs that are generated when the traffic limit for WAN1 interface that was set at
10 MB has been reached. Depending on the setting that is configured in the
"When Limit is reached" section on the WAN1 Traffic Meter screen (see
"Enabling the WAN Traffic Meter" on page
traffic might be stopped.
Note: For WAN2 interface, see the settings on the WAN2 Traffic Meter screen.
To start the traffic, restart the traffic counter in the "Traffic Counter" section on
the WAN1 Traffic Meter screen.
Note: For WAN2 interface, see the settings on the WAN2 Traffic Meter screen.
Nov 24 11:52:55 [UTM] [kernel] UCAST IN=SELF OUT=WAN
SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049
• This unicast packet is destined to the device from the WAN network.
• For other parameters, see
None
Feb 2007 22 14:36:07 [UTM] [kernel] [LOG_PACKET] SRC=192.168.1.49
DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1
• This packet is an ICMP Redirect message sent to the device by another
device.
• For other parameters, see
None
v1.0, September 2009
11-1), all the incoming and outgoing
Table C-1.
Table C-1.
C-9