NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 111

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
To enable and configure RIP:
1. Select Network Configuration > Routing from the menu.
2. Click the RIP Configuration option arrow at the right of the Routing submenu tab. The RIP
Configuration screen displays.
Figure 4-11
3. Enter the settings as explained in
LAN Configuration
Table 4-5 on page 4-26.
v1.0, September 2009
4-25