NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 234

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
To add or edit an IKE policy, see
Note: You cannot delete or edit an IKE policy for which the VPN policy is active. You
first must disable or delete the VPN policy before you can delete or edit the IKE
policy.
Note: To gain a more complete understanding of the encryption, authentication and
DH algorithm technologies, see the link to
Appendix
Manually Adding or Editing an IKE Policy
To manually add an IKE policy:
1. Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs appear with the IKE
Policies screen in view (see
2. Under the List of IKE Policies table, click the add table button. The Add IKE Policy screen
displays (see Figure 7-21 on page
WAN2 radio buttons (next to Select Local Gateway) are shown on the Add IKE Policy screen
for the UTM25 but not on the Add IKE Policy screen for the UTM10.
7-24
"Manually Adding or Editing an IKE Policy
E.
Figure 7-20 on page
7-25, which shows the UTM25 screen). The WAN1 and
Virtual Private Networking Using IPsec Connections
v1.0, September 2009
"Virtual Private Networking Basics" in
7-23).
on this page.