NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 184

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Figure 6-7
2. Enter the settings as explained in
Table 6-6. Web Protocol, Instant Messaging, and Peer-to-Peer Settings
Setting
Web
HTTP
HTTPS
FTP
6-20
Table 6-5.
Description (or Subfield and Description)
Select the HTTP checkbox to enable Hypertext Transfer Protocol (HTTP)
scanning. This service is enabled by default and uses default port 80.
Select the HTTPS checkbox to enable Hypertext Transfer Protocol over Secure
Socket Layer (HTTPS). This service is disabled by default. The default port
is 443.
Select the FTP checkbox to enable File Transfer Protocol (FTP). This service is
enabled by default and uses default port 21.
v1.0, September 2009
Content Filtering and Optimizing Scans