Place The Switch On A Flat Surface; Optional Step 5: Install Sfp Transceiver Modules - NETGEAR GS716TP Hardware Installation Manual

16-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports

Place the switch on a flat surface

The switch ships with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the
switch.
The rubber footpads cushion the switch against shock and vibrations. They also
provide ventilation space between stacked switches.
Optional Step 5: Install SFP transceiver
modules
The following optional procedure describes how to install an optional SFP transceiver
module into one of the SFP ports of the switch.
Note: Contact your NETGEAR sales office to purchase these modules. If you do not
want to install an SFP module, skip this procedure.
To install an SFP transceiver module:
1. Insert the transceiver into SFP port 17 or 18.
2. Press firmly on the flange of the module to seat it securely into the connector.
Installation 28 Hardware Installation Guide