NETGEAR UTM25-100NAS - Prosecure Utm Appliance 25U No Sub Included Reference Manual page 237

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 7-10. Add IKE Policy Settings (continued)
Item
Local
Select Local Gateway
(UTM25 only)
Identifier Type
Remote
Identifier Type
IKE SA Parameters
Encryption Algorithm
Virtual Private Networking Using IPsec Connections
Description (or Subfield and Description)
For the UTM25 only, select a radio button to specify the WAN1 or WAN2
interface.
From the pull-down menu, select one of the following ISAKMP identifiers to
be used by the UTM, and then specify the identifier in the field below:
• Local WAN IP. The WAN IP address of the UTM. When you select this
option, the Identifier field automatically shows the IP address of the
selected WAN interface.
• FQDN. The Internet address for the UTM.
• User FQDN. The e-mail address for a local VPN client or the UTM.
• DER ASN1 DN. A distinguished name (DN) that identifies the UTM in the
DER encoding and ASN.1 format.
Identifier Depending on the selection of the Identifier Type pull-
down menu, enter the IP address, e-mail address, FQDN,
or distinguished name.
From the pull-down menu, select one of the following ISAKMP identifiers to
be used by the remote endpoint, and then specify the identifier in the field
below:
• Local WAN IP. The WAN IP address of the remote endpoint. When you
select this option, the Identifier field automatically shows the IP address of
the selected WAN interface.
• FQDN. The FQDN for a remote gateway.
• User FQDN. The e-mail address for a remote VPN client or gateway.
• DER ASN1 DN. A distinguished name (DN) that identifies the remote
endpoint in the DER encoding and ASN.1 format.
Identifier Depending on the selection of the Identifier Type pull-
down menu, enter the IP address, e-mail address, FQDN,
or distinguished name.
From the pull-down menu, select one of the following five algorithms to
negotiate the security association (SA):
• DES. Data Encryption Standard (DES)
• 3DES. Triple DES. This is the default algorithm.
• AES-128. Advanced Encryption Standard (AES) with a 128-bits key size.
• AES-192. AES with a 192-bits key size.
• AES-256. AES with a 256-bits key size.
v1.0, September 2009
7-27