Table of Contents
Advertisement
ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual
Table 2-2. Setup Wizard Step 2: WAN Settings (continued)
Setting
Austria (PPTP)
(continued)
Other (PPPoE)
Internet (IP) Address
Click the Current IP Address link to see the currently assigned IP address.
Get Dynamically from
ISP
Use Static IP Address
Domain Name Server (DNS) Servers
Get Automatically from
ISP
Using the Setup Wizard to Provision the UTM in Your Network
Description (or Subfield and Description)
Idle Timeout
Select the Keep Connected radio button to keep the
connection always on. To log out after the connection is
idle for a period of time, select the Idle Time radio button
and, in the timeout field, enter the number of minutes to
wait before disconnecting. This is useful if your ISP
charges you based on the period that you have logged in.
My IP Address
The IP address assigned by the ISP to make the
connection with the ISP server.
Server IP Address
The IP address of the PPTP server.
If you have installed login software such as WinPoET or Enternet, then your
connection type is PPPoE. Select this radio button and enter the following settings:
Account Name
The valid account name for the PPPoE connection.
Domain Name
The name of your ISP's domain or your domain name if
your ISP has assigned one. You may leave this field blank.
Idle Timeout
Select the Keep Connected radio button to keep the
connection always on. To log out after the connection is
idle for a period of time, select the Idle Time radio button
and, in the timeout field, enter the number of minutes to
wait before disconnecting. This is useful if your ISP
charges you based on the period that you have logged in
If your ISP has not assigned you a static IP address, select the Get dynamically
from ISP radio button. The ISP automatically assigns an IP address to the UTM
using DHCP network protocol.
If your ISP has assigned you a fixed (static or permanent) IP address, select the
Use Static IP Address radio button and enter the following settings:
IP Address
Static IP address assigned to you. This address identifies
the UTM to your ISP.
Subnet Mask
The subnet mask is usually provided by your ISP.
Gateway IP Address
The IP address of the ISP's gateway is usually provided by
your ISP.
If your ISP has not assigned any Domain Name Servers (DNS) addresses, select
the Get Automatically from ISP radio button.
v1.0, September 2009
2-13
Advertisement
Table of Contents
Troubleshooting
